
Technical specifications Ammann 240, 2018 yr.:
Capacity: 240 t / hour (at 3% moisture)
New, without operating hours.
Specifications:
1. Cold aggregate feeding system
1.1. Cold bunker 5 pcs. * 15 m3
1.2. Weighing belts
Cold bunkers 5 pcs. (Motors 1.2 kW, belt width 570 mm, belt thickness 10 mm, for each sensor)
1.3. Aggregate feed line length 25 m, electric motor 3 kW, belt width 680 mm, belt thickness 10 mm, capacity 310 t / hour.
2. Drying drum and burner.
2.1. Drying drum: model ES2390, drum diameter 2,300 mm, drum length 9,000 mm, drive motors 4 * 15 kW, soft start drive available, outlet - outlet for measuring aggregate temperature.
2.2. Burner: high-pressure type Oertly MIB 453, combined-type burner, maximum power 11 954 000 kcal / hour, burner fan power 30 kW, ready to operate on both natural gas and diesel fuel.
3. Mixing tower
3.1. Aggregate elevator size 1,100 * 670 mm, motor power 15 kW,
3.2. Screening, model Ammann VA1840, number of fractions 5, number of decks 5, screen dimensions 1,800 * 4,000 mm, screening area 31 m2, drive motor power 2 * 7.5 kW.
3.3. Hot material bunker, fraction No.5 + 1 bypass, bunker volume 18 m3 (30 t), level sensors 5 pcs constant type, insulation thickness 60 mm, density 80 kg / m3, thermal packing available.
3.4. Mixer, model Ammann Amix 2/4, capacity 3500 kg, drive motors 2 * 50 kW, with electric heating,
3.5. Dosing devices:
3.5.1. Aggregate feeder, maximum capacity 3500 kg, 3 sections.
3.5.2. Bitumen dispenser, capacity 300 kg, 1 section.
3.5.3. Filler feeder with capacity 400 kg.
3.6. General:
Bitumen tanks 4 * 50 t
3.6.1. Bitumen supply pump, capacity 50 m3 / hour, motor power 15 kW, bitumen filter, 3-way valve, fully electrically heated, all lines insulated;
* Stairs and handrails.
* All stairs are galvanized.
4. Filtration system
4.1. Filter, model DM-IF 450, bag type, bags made of aramid material with density 450 g / m2, number of bags 470 pcs, filtration area 750 m2, air flow 69,300 m3 / hour.
4.2. Fan with filter, motor power 92 kW.
4.3. Discharge pipe, height 6.
4.4. Compressor, model PS 15 MT8, working pressure 8 bar, capacity 2.43 m3 / min, motor power 15 kW.
5. Powder handling system
5.1. Dust silo, volume 25 m3, top and bottom level sensors, screw conveyor, discharge pipe to road transport.
6. Finished asphalt bunker.
6.1. Finished asphalt bunker, 1 section, 2 pneumatic covers for unloading, with electric heating and thermal insulation, bunker volume 17 m3 (30 t).
6.2. Oversize material bunker volume 2 m3
7. Control system
7.1. Control cabin, dimensions 2,420 * 6,500 * 2,420 mm, air conditioner
7.2. Automation system type AC1.
