Slurry pump in United States

Tobee DT Series FGD Gypsum Slurry Pump is a single-stage, single-suction horizontal centrifugal pump. It is mainly used as the circulating pump for the absorbent tower in FGD systems. It has the advantages of a wide capacity range, high efficiency, and better energy savings. The wetted parts are

Size: 1" to 22" capacity: 3.6-5400 m3/h head: 6-125 m handling solids: 0-130mm concentration: 0%-70% materials: hyper chrome alloy, rubber, polyurethane, ceramic, stainless steel etc.

Tobee 4RV-AF Froth Slurry Pump is a vertical cantilevered centrifugal pump, and is designed for the most difficult pumping applications for highly abrasive, high-density or erosive slurries. 4RV-AF Froth pumps are widely used in mining, metallurgy, electric power, coal, chemical industry, building

Tobee TL(R) FGD Limestone Slurry Pump is the new-generation high-efficiency energy-saving pump product elaborately researched and developed by Tobee through absorbing the technical advantages from similar FGD pumps from domestic and abroad, with reference to the technical specifications of flue gas

Tobee 16/14TU-AHR Rubber Lined Slurry Pump is an end-suction, split-case, centrifugal slurry pump that has set the world standard for heavy duty abrasive pumping applications. With large shaft diameters, heavy duty bearing assemblies and robust slurry pumping capacity, the 16/14 slurry pump

Tobee 2/1.5B-AH Slurry Pump is designed for handling highly abrasive, high-density slurries with excellent wear life while maintaining efficiency during the wear cycle, providing the best total operating cost. It is widely used for Pipeline transport, High-velocity hydraulic transport, Mineral

Tobee 16x14TU-AH Slurry Pumps provide an ideal replacement for many OEM slurry pumps used in Minerals processing plant, such as Mill Discharge, cyclone feed, transfer slurry, tailing, dewatering, pipeline, Power plant, Chemical Process, sand and gravel process, and any other industry application

Tobee Hydroman 400TJQ Electric Submersible Slurry Pump adopts excellent material, advanced structure, and it is with a wide flow passage and strong delivery capability. The wear parts are wear-resistant chrome alloy. They are mainly used for transporting liquid with solid particles, like sand,

Tobee Hydroman THY24 - THY85 Heavy Duty Hydraulic Slurry Pumps are designed for pumps driven by hydraulic motors, enabling the elimination of haul trucks, conveyor belts and other mechanical earth-moving equipment. Hydraulic submersible slurry pumps are capable of dredging sand from rivers and/or

Tobee Hydroman THY Hydraulic Submersible Slurry Pump is designed for handling rocks, slurry, gravel, sand, stone, minerals, bentonite and others, with the shortest delivery times. Hydroman pumps deliver massive solids production at very low operational costs. The THY hydraulic slurry pump can be

Tobee Hydroman TJQ Submersible Slurry Pumps are heavy-duty agitator submersible slurry pumps, dredge pumps, sand pumps, and sludge pumps in the industry, capable of handling slurry, sand, gravel, solids and all kinds of sludge in diverse applications related to the dredging, construction, oil and

Tobee 2QV-AF Froth Slurry Pump is a vertical, double-casing, single-stage centrifugal froth pump, manufactured with advanced technology. The 2QV-AF froth pump can effectively eliminate the bubbles in the slurry during operation; even when the slurry capacity is insufficient the pump can work

Tobee 6SV-AF Froth Slurry Pump has been designed to increase the pumping ability of frothy slurry. The principle of operation is similar to that of hydrocyclone separation. Air is separated from the slurry in a vortex created by the impeller rotation and the tangential inlet to the pump's conical

Tobee AF Vertical Froth Slurry Pumps are the latest generation of froth pumps based on advanced domestic and international technology. They have a vertical shaft configuration, and comprise a hopper with a vertical bearing assembly. AF froth slurry pump is designed for transporting highly abrasive

Tobee WN300 Dredge Booster Pump is a highly effective, wear-resistant marine dredging pump. The wetted parts, such as the impeller, volute liner, front liner and back liner, are made of high chrome alloy. WN300 dredge pump is mainly used in dredgers for dredging rivers, sand dredging, blowing sand

Tobee GH High Head Gravel Pumps are capable of handling large particles at consistently high head, high pressure, and long distance, resulting in lower costs. The casing is designed with a large-volume internal profile to reduce associated velocities, which prolongs component life. Designed to pump

Tobee 40PV-SP Vertical Slurry Pump is ideal for a variety of submerged suction pumping applications. The vertical slurry pumps operate well in a variety of sump conditions, and can also be readily applied on floating dewatering or other floating pump platforms. As a true cantilevered vertical

Tobee 65QV-SP Vertical Slurry Pump is designed to handle diverse uses including all rugged mining and industrial applications, always ensuring reliable performance and excellent wear endurance. 65QV-SP vertical sump pumps are available in various standard lengths to suit common sump depths, and

Tobee 100RV-SP Vertical Slurry Pump is designed for handling abrasive and corrosive liquids and slurries, while submerged in sumps or pits. Suited for applications requiring greater reliability and durability than conventional vertical process pumps can offer. It is mainly used for pumping the

Tobee 150SV-SP Vertical Slurry Pump is available in a wide range of popular sizes to suit most pumping applications. Thousands of these pumps are proving their reliability and efficiency worldwide in Minerals processing, Coal preparation, Chemical processing, Effluent handling, Sand and gravel and

Tobee 200SV-SP Vertical Slurry Pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High-capacity, double-suction design. Optional recessed

Tobee 250TV-SP Vertical Slurry Pump is a heavy duty cantilevered pump with no submerged bearings or seals, which is ideal for a variety of submerged suction pumping applications. These pumps operate well in a variety of sump conditions, and can also be readily applied on floating dewatering or

Tobee 300TV-SP Vertical Slurry Pump is designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water and particle-contaminated water. Due to the design of the pump assembly, a shaft seal is not required and the pump can be operated in conditions in which most pumps would

Tobee SPR Rubber Lined Vertical Slurry Pumps are available in various standard lengths to suit common sump depths, for very deep sumps or where high shaft speeds limit the length of the pump, a suction extension pipe can be fitted to the bottom inlet to extend the depth of the pump by up to 2

Tobee SP/SPR vertical slurry pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer-lined or hard-metal fitted. No submerged bearings or packing. High-capacity double-suction design. Customized submerged

Tobee M Medium Slurry Pumps are designed for continuous pumping of medium duty abrasive/dense slurries in processes from minerals processing, cyclone feed to regrind, flotation and tailings. Design Features: √ Modular design for ease of maintenance. √ Medium-duty one-piece frame base with

Tobee L Light-Duty Slurry Pumps have been developed for continuous use in slurry applications where a low to medium developed head is required, designed for lighter slurry densities up to 1,35. They share proven unique design features with the AH slurry pump range. A key feature is the light-duty,

Tobee 1.5/1B-AH Slurry Pump is an end-suction, split-case centrifugal slurry pump that has set the world standard for heavy-duty abrasive pumping applications. With large shaft diameters, heavy-duty bearing assemblies and robust slurry pumping capacity, application customization comes standard with

Tobee 3/2C-AH Slurry Pump is a heavy-duty slurry pump designed to handle the most abrasive and dense slurries. The 3/2C-AH slurry pump offers users a wide range of seal and liner configurations, allowing the pump to be fully customized to meet any specific application requirements. 3/2C-AH slurry

Tobee 4x3C-AH Slurry Pump is engineered with the latest hydraulic and wear technologies to cope with the most severe corrosive and abrasive slurry applications. The 4x3C-AH pumps feature patented innovative designs that can significantly reduce the operational costs of slurry pumping. It is widely

Tobee 4x3D-AH Slurry Pump is a standard horizontal dewatering pump for pumping abrasive slurries, designed for ultra heavy-duty applications such as mill discharge, process plants and tailings, high-pressure pipelines, as well as other specialty applications. The bearing assembly uses a

6x4D-AH Slurry Pump is a single-stage, single-suction and horizontal heavy duty centrifugal slurry pump with a cantilever design. The 6x4 slurry pumps are mainly used in solids-containing applications. Depending on process conditions, equipment should be suitable for highly abrasive or corrosive

6x4E-AH Slurry Pump is designed for continuous conveying of highly abrasive and high-hardness, high-concentration, low-corrosion slurries that contain suspended solid particles, such as finished ores, refuse ores, ashes, cinders, cements, mud, mineral stones in tailings mining, minerals recycling,

8x6E-AH Slurry Pump is used for highly abrasive and high-density slurries in processes from cyclone feed to regrind, mill discharge, flotation, mine drainage and tailings in mineral plants plus other industrial applications. Sometimes, it could also be used in dredging and drilling mud

Tobee 10x8ST-AH Centrifugal Slurry Pumps are the most comprehensive range of centrifugal slurry pumps for use in mining, chemical, mineral processing and general industry applications. The horizontal slurry pumps are designed for heavy duty applications such as mill discharge, power sector and

12x10ST-AH Slurry Pump is a robust, state-of-the-art slurry pump that features oil- or grease-lubricated bearing assemblies and is completely interchangeable with other major brands. The 12x10 centrifugal slurry pump can be supplied in high chrome alloy materials specifically designed for

The 14x12ST-AH Slurry Pump is made for high-wear and heavy-duty applications. 14x12 slurry pumps and replacement parts are used in industries worldwide such as mining, mineral processing, power generation, aggregate processing, or any type of slurry pumping system. It is especially for handling the

Tobee 18x16TU-AH Slurry Pump is perfect for difficult mill duties with long wear life. It is the most complete range of centrifugal slurry pumps for use in mining, industrial, and chemical applications. The 18x16 horizontal slurry pumps were created for ultra heavy duty applications like mill

Tobee 20x18TU-AH Slurry Pump is one of the world’s most comprehensive centrifugal slurry pumps for use in mining, chemical and industrial applications. The 20x18 slurry pumps are designed for ultra heavy duty applications such as mill discharge, process plant and tailings, high pressure pipelines,

Tobee 1.5/1B-AHR Rubber Lined Slurry Pump is a standard heavy duty slurry pump which is designed with rubber lining. It is more suitable for delivering strongly corrosive or abrasive slurries of small particle size without sharp edges. The rubber lined slurry pumps are typically used in process