Abrasive pump in Honolulu

Tobee WN300 Dredge Booster Pump is a highly effective, wear-resistant marine dredging pump. The wetted parts, such as the impeller, volute liner, front liner and back liner, are made of high chrome alloy. WN300 dredge pump is mainly used in dredgers for dredging rivers, sand dredging, blowing sand

Tobee 16/14TU-AHR Rubber Lined Slurry Pump is an end-suction, split-case, centrifugal slurry pump that has set the world standard for heavy duty abrasive pumping applications. With large shaft diameters, heavy duty bearing assemblies and robust slurry pumping capacity, the 16/14 slurry pump

Tobee 4RV-AF Froth Slurry Pump is a vertical cantilevered centrifugal pump, and is designed for the most difficult pumping applications for highly abrasive, high-density or erosive slurries. 4RV-AF Froth pumps are widely used in mining, metallurgy, electric power, coal, chemical industry, building

Tobee Mission 2500 Supreme Centrifugal Pump has a semi-open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction, allowing the pump to create a smoother flow pattern when handling abrasive fluids. The 2500 Supreme is available in hard iron, supreme hard

Tobee 2/1.5B-AH Slurry Pump is designed for handling highly abrasive, high-density slurries with excellent wear life while maintaining efficiency during the wear cycle, providing the best total operating cost. It is widely used for Pipeline transport, High-velocity hydraulic transport, Mineral

Tobee AF Vertical Froth Slurry Pumps are the latest generation of froth pumps based on advanced domestic and international technology. They have a vertical shaft configuration, and comprise a hopper with a vertical bearing assembly. AF froth slurry pump is designed for transporting highly abrasive

Tobee 18x16TU-G Gravel Pump is designed for continuous handling of the most highly abrasive slurries, containing solids too large to be pumped by a standard slurry pump. The 18x16 gravel pump is widely used for Sand Excavation, Coal Washery, Power Plant, Mineral Processing Plants, and other

Tobee Mission Magnum I pumps are proven to be reliable, heavy-duty, low-cost slurry pumps. The 3×2×13 through 8×6×14 pumps all feature the same power end, which ensures production and reduced spare-part inventory requirements. The Mission MAGNUM I has been engineered for the toughest jobs in

Tobee 65QV-SP Vertical Slurry Pump is designed to handle diverse uses including all rugged mining and industrial applications, always ensuring reliable performance and excellent wear endurance. 65QV-SP vertical sump pumps are available in various standard lengths to suit common sump depths, and

Tobee 300TV-SP Vertical Slurry Pump is designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water and particle-contaminated water. Due to the design of the pump assembly, a shaft seal is not required and the pump can be operated in conditions in which most pumps would

Tobee M Medium Slurry Pumps are designed for continuous pumping of medium duty abrasive/dense slurries in processes from minerals processing, cyclone feed to regrind, flotation and tailings. Design Features: √ Modular design for ease of maintenance. √ Medium-duty one-piece frame base with

Tobee DT Series FGD Gypsum Slurry Pump is a single-stage, single-suction horizontal centrifugal pump. It is mainly used as the circulating pump for the absorbent tower in FGD systems. It has the advantages of a wide capacity range, high efficiency, and better energy savings. The wetted parts are

Tobee 1.5/1B-AH Slurry Pump is an end-suction, split-case centrifugal slurry pump that has set the world standard for heavy-duty abrasive pumping applications. With large shaft diameters, heavy-duty bearing assemblies and robust slurry pumping capacity, application customization comes standard with

Tobee 3/2C-AH Slurry Pump is a heavy-duty slurry pump designed to handle the most abrasive and dense slurries. The 3/2C-AH slurry pump offers users a wide range of seal and liner configurations, allowing the pump to be fully customized to meet any specific application requirements. 3/2C-AH slurry

Tobee 4x3C-AH Slurry Pump is engineered with the latest hydraulic and wear technologies to cope with the most severe corrosive and abrasive slurry applications. The 4x3C-AH pumps feature patented innovative designs that can significantly reduce the operational costs of slurry pumping. It is widely

6x4D-AH Slurry Pump is a single-stage, single-suction and horizontal heavy duty centrifugal slurry pump with a cantilever design. The 6x4 slurry pumps are mainly used in solids-containing applications. Depending on process conditions, equipment should be suitable for highly abrasive or corrosive

8x6E-AH Slurry Pump is used for highly abrasive and high-density slurries in processes from cyclone feed to regrind, mill discharge, flotation, mine drainage and tailings in mineral plants plus other industrial applications. Sometimes, it could also be used in dredging and drilling mud

Tobee 10x8ST-AH Centrifugal Slurry Pumps are the most comprehensive range of centrifugal slurry pumps for use in mining, chemical, mineral processing and general industry applications. The horizontal slurry pumps are designed for heavy duty applications such as mill discharge, power sector and

The 14x12ST-AH Slurry Pump is made for high-wear and heavy-duty applications. 14x12 slurry pumps and replacement parts are used in industries worldwide such as mining, mineral processing, power generation, aggregate processing, or any type of slurry pumping system. It is especially for handling the

Tobee 16x14TU-AH Slurry Pumps provide an ideal replacement for many OEM slurry pumps used in Minerals processing plant, such as Mill Discharge, cyclone feed, transfer slurry, tailing, dewatering, pipeline, Power plant, Chemical Process, sand and gravel process, and any other industry application

Tobee 1.5/1B-AHR Rubber Lined Slurry Pump is a standard heavy duty slurry pump which is designed with rubber lining. It is more suitable for delivering strongly corrosive or abrasive slurries of small particle size without sharp edges. The rubber lined slurry pumps are typically used in process

Tobee 3/2C-AH Rubber Lined Slurry Pump is designed for the continuous pumping of highly abrasive, high-density slurries with minimal maintenance requirements. It will maintain high efficiency over the wear life of its components. The rubber lined slurry pumps feature casings which are radially

Tobee 4x3D-AHR Rubber Lined Slurry Pump is a heavy-duty slurry pump handling tough and abrasive duties. Rubber slurry pumps are widely used for continuous pumping of highly abrasive/dense slurries in processes from cyclone feed to regrind, mill discharge, flotation, mine drainage, dredging of

Tobee 6/4E-AHR Rubber Lined Slurry Pump is a cantilevered, horizontal, centrifugal, double casing slurry pump. They are designed for the handling of highly abrasive, high-density slurries. The wet parts of 6/4 slurry pumps are made of natural rubber, which are replaceable, wear-resistant parts. The

Tobee 8/6E-AHR Rubber Lined Slurry Pump is the standard heavy duty slurry pump which is designed for the continuous pumping of highly abrasive, high density slurries with minimal maintenance requirements. It maintains high efficiencies over the wear life of its components. 8/6 slurry pump is

Tobee 14x12ST-AHR Rubber Lined Slurry Pump is a horizontal centrifugal heavy duty slurry pump and it is designed for the continuous pumping of high abrasive, high density slurries with minimal maintenance requirements. The 14x12 pump will maintain high efficiency over the wear life of its

Tobee 18/16TU-AHR Rubber Lined Slurry Pump is a standard heavy-duty slurry pump designed for the continuous pumping of highly abrasive, high-density slurries with minimal maintenance requirements. The 18/16 slurry pump maintains high efficiencies over the wear life of its components. This type of

Tobee 8x6S-HH High Head Slurry Pump is a world-standard heavy-duty slurry pump and has outstanding performance in high-head applications. It is widely used in mining, coal washing, power plants, metallurgy, petrochemical, building materials, dredging, and other industrial departments, etc. The 8x6

Tobee 12/10F-M Slurry Pump is a proven horizontal end suction centrifugal slurry pump that will reliably and economically handle abrasive and corrosive medium duty services. The 12/10F-M medium slurry pumps are of heavy-duty construction, designed for continuous pumping of highly abrasive and

Tobee AHR rubber lined slurry pumps are similar to AH metal lined slurry pumps in structure. The main difference between AH and AHR is the material of wetted parts, which are natural rubber, synthetic rubber or other wear-resistant rubbers. AHR rubber lined slurry pumps are more suitable in

Tobee 3QV-AF Vertical Froth Pump is designed to increase the pump ability of frothy slurries. The principle of operation is similar to that of hydrocyclone separation. Air is separated from the slurry in a vortex created by the impeller rotation and the tangential inlet to the pump's conical sump.

Tobee 8SV-AF Vertical Froth Pump is the latest generation of froth pump based on advanced technology at home and abroad. It has a vertical shaft configuration and comprises a hopper with a vertical bearing assembly. The 8 inch froth slurry pump is designed for transporting highly abrasive and

Tobee WN500 Gold Dredge Pump is designed for continuous handling of the most difficult, highly abrasive slurries and sands that contain oversized solids. It has the advantages of a single casing, wide channels, and high-chrome wetted parts. The discharge can be installed 360 degrees in any

Tobee WN600 Suction Dredge Pump is a new type dredging pump, aimed at China's river, lake and sea situations, which have not been maintained for many years and are now in great need of hydraulic dredging and filling. The dredging pump has characteristic features: easy installation, long service

Tobee 12x10G-G Gravel pump is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies, resulting in low cost of ownership. The large volume internal profile of the

Tobee 14x12G-G Gravel Pump is designed for continuous handling of the most difficult, highly abrasive slurries which contain solids too large to be pumped by a standard slurry pump. 14x12 gravel and dredge pumps are suitable for conveying gravels, sands and slurries in mining; explosive sludge in

Tobee 14x12T-G Gravel pump is designed specifically for continuous pumping of extremely aggressive slurries with a wide particle size distribution. Its wear parts are made from high chrome alloy; the hardness can reach up to HRC65. It is capable of handling large particles at consistently high

Tobee 10x8S-GH High Head Gravel Pump is designed for continuous handling of the most difficult, highly abrasive, large-particle slurries with extra high head. The wet parts are made of high-chrome alloys to ensure long service life. GH gravel pumps have far better performance than common gravel

Tobee Mission Magnum 8x6x18, 12x10x23 and 14x12x22 Blender Pumps are ideally suited for pumping high volumes of heavy slurries that are abrasive and corrosive. An excellent choice for high volume mobile and stationary applications where a small footprint is critical. The low stuffing box pressure

Tobee 10x8S-G Gravel Pumps are the most comprehensive range of centrifugal gravel sand pumps for use in mining, chemical and general industry applications. The horizontal sand gravel pumps are designed for heavy duty applications such as mining, power sector, river dredging, and tailings, as well