Centrifugal pump in United States

Tobee 12x10G-GH High Head Gravel Pump is the world’s standard pump for dredge and gravel with high pressure applications. The 12x10 pump performance range provides excellent wear life while maintaining efficiency during the wear cycle providing the best total operating cost. A wide variety of shaft

Tobee Mission 2500 Supreme Centrifugal Pump has a semi-open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction, allowing the pump to create a smoother flow pattern when handling abrasive fluids. The 2500 Supreme is available in hard iron, supreme hard

Tobee WN1000 Dredge Pump is a single-stage, single-suction, cantilever, horizontal, centrifugal dredge pump with advantages of light weight, good wear resistance, excellent dredging performance, perfectly suited for dredging across the whole construction, and high multiple economic benefits. It

Tobee DT Series FGD Gypsum Slurry Pump is a single-stage, single-suction horizontal centrifugal pump. It is mainly used as the circulating pump for the absorbent tower in FGD systems. It has the advantages of a wide capacity range, high efficiency, and better energy savings. The wetted parts are

Tobee 10x8ST-AH Centrifugal Slurry Pumps are the most comprehensive range of centrifugal slurry pumps for use in mining, chemical, mineral processing and general industry applications. The horizontal slurry pumps are designed for heavy duty applications such as mill discharge, power sector and

Tobee 16/14TU-AHR Rubber Lined Slurry Pump is an end-suction, split-case, centrifugal slurry pump that has set the world standard for heavy duty abrasive pumping applications. With large shaft diameters, heavy duty bearing assemblies and robust slurry pumping capacity, the 16/14 slurry pump

Tobee 4RV-AF Froth Slurry Pump is a vertical cantilevered centrifugal pump, and is designed for the most difficult pumping applications for highly abrasive, high-density or erosive slurries. 4RV-AF Froth pumps are widely used in mining, metallurgy, electric power, coal, chemical industry, building

Tobee 2QV-AF Froth Slurry Pump is a vertical, double-casing, single-stage centrifugal froth pump, manufactured with advanced technology. The 2QV-AF froth pump can effectively eliminate the bubbles in the slurry during operation; even when the slurry capacity is insufficient the pump can work

Tobee WN450 Sand Dredge Pump is single stage single suction horizontal cantilevered centrifugal dredging pump. Tobee designs and researches this new type dredging pump by making full use of advanced CAD software, aiming to dredge rivers, lakes and seas which are in great need of dredging in the

Tobee WN700 CSD Dredge Pump is a kind of special pump used for cutter suction dredger, hopper suction dredger or offshore dredging platform, etc. It has a double casing, single-stage cantilevered centrifugal dredge pump structure. The WN700 dredge pump is equipped with a frame and the lubrication

Tobee WN900 Marine Dredge Pump is one type of horizontal centrifugal dredging pump. It is mainly used for dredging in rivers, lakes, seaports, lagoons, ponds, reservoirs etc. It is usually installed in dredgers. It is very suitable for sand and mud dredging. The marine dredge pump is made of high

Tobee WN Dredge Pumps are single-stage, single-suction, cantilever, horizontal, centrifugal pumps with advantages of light weight, good wear-resistance, and superior dredging performance. WN dredging pumps impeller passage is very wide. They can continuously transport gravels or high-plasticity

Tobee 6x4D-G Gravel Pump is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing

Tobee 12x10F-G Gravel Pump is a single stage, single casing, centrifugal horizontal pump driven by electric motor or diesel engine. Large flow passage allows large particle solids, with advantages of high efficiency, wear resistant, wide flow channel, good ability of NPSH, stable performance, easy

Tobee 10x8S-GH High Head Gravel Pump is designed for continuous handling of the most difficult, highly abrasive, large-particle slurries with extra high head. The wet parts are made of high-chrome alloys to ensure long service life. GH gravel pumps have far better performance than common gravel

Tobee 10x8S-G Gravel Pumps are the most comprehensive range of centrifugal gravel sand pumps for use in mining, chemical and general industry applications. The horizontal sand gravel pumps are designed for heavy duty applications such as mining, power sector, river dredging, and tailings, as well

Tobee TJL Vertical Sump Pump is vertical, axial-suction, single-stage, single-suction, single casing and centrifugal structure. This series of pumps combines the advantages of similar sump pumps from China & other countries. It has the features of high efficiency, energy conservation, wear

Tobee 1.5/1B-AH Slurry Pump is an end-suction, split-case centrifugal slurry pump that has set the world standard for heavy-duty abrasive pumping applications. With large shaft diameters, heavy-duty bearing assemblies and robust slurry pumping capacity, application customization comes standard with

Tobee 4x3D-AH Slurry Pump is a standard horizontal dewatering pump for pumping abrasive slurries, designed for ultra heavy-duty applications such as mill discharge, process plants and tailings, high-pressure pipelines, as well as other specialty applications. The bearing assembly uses a

6x4D-AH Slurry Pump is a single-stage, single-suction and horizontal heavy duty centrifugal slurry pump with a cantilever design. The 6x4 slurry pumps are mainly used in solids-containing applications. Depending on process conditions, equipment should be suitable for highly abrasive or corrosive

12x10ST-AH Slurry Pump is a robust, state-of-the-art slurry pump that features oil- or grease-lubricated bearing assemblies and is completely interchangeable with other major brands. The 12x10 centrifugal slurry pump can be supplied in high chrome alloy materials specifically designed for

Tobee 18x16TU-AH Slurry Pump is perfect for difficult mill duties with long wear life. It is the most complete range of centrifugal slurry pumps for use in mining, industrial, and chemical applications. The 18x16 horizontal slurry pumps were created for ultra heavy duty applications like mill

Tobee 1.5/1B-AHR Rubber Lined Slurry Pump is a standard heavy duty slurry pump which is designed with rubber lining. It is more suitable for delivering strongly corrosive or abrasive slurries of small particle size without sharp edges. The rubber lined slurry pumps are typically used in process

Tobee 2/1.5B-AHR Rubber Lined Slurry Pump is the most comprehensive range of centrifugal slurry pumps for use in mining, chemical and general industry applications. The 2/1.5B-AHR rubber slurry pumps are designed for heavy duty applications such as mill discharge, power sector and tailings as well

Tobee 4x3D-AHR Rubber Lined Slurry Pump is a heavy-duty slurry pump handling tough and abrasive duties. Rubber slurry pumps are widely used for continuous pumping of highly abrasive/dense slurries in processes from cyclone feed to regrind, mill discharge, flotation, mine drainage, dredging of

Tobee 6/4E-AHR Rubber Lined Slurry Pump is a cantilevered, horizontal, centrifugal, double casing slurry pump. They are designed for the handling of highly abrasive, high-density slurries. The wet parts of 6/4 slurry pumps are made of natural rubber, which are replaceable, wear-resistant parts. The

The 10/8F-AHR Rubber Lined Slurry Pump adopts a double-casing structure, making it easier to use and maintain. Wetted parts are made from natural rubber and are durable in use. The 10x8 rubber lined pump is available with gland packing seal, expeller seal, or mechanical seal. The rubber lined

Tobee 14x12ST-AHR Rubber Lined Slurry Pump is a horizontal centrifugal heavy duty slurry pump and it is designed for the continuous pumping of high abrasive, high density slurries with minimal maintenance requirements. The 14x12 pump will maintain high efficiency over the wear life of its

3/2D-HH High Head Slurry Pump is designed to produce high heads per stage at high pressures. Commonly used for long-distance transport lines, the high head slurry pump lines can often satisfy application duties with a single pump where others require multiple pumps in series. Tobee 3/2D-HH High

Tobee 1.5/1 HH High Head Slurry Pump Typical Applications: The HH high head centrifugal slurry pumps are widely used for Tailings delivery, Mineral processing, Coal prep, Cyclone feed, Mill discharge, Mill grinding, Fly ash, Tunnel, Heavy media, Dredging, Bottom/fly ash, Lime grinding, Oil sands,

Tobee 4/3E-HH High Head Slurry Pump is fit for a variety of applications ranging from filter press feeds to pipeline transport staging pumps. The high heads along with sturdier wear parts makes these pumps some of the most rugged in the slurry pump line. Extensive exterior ribbing allows for higher

Tobee 10x8E-M Medium Duty Slurry Pump is cantilevered, horizontal and centrifugal with double casing structure. It is mainly suitable for pumping medium concentration slurries. The 10x8E-M slurry pump applies in coal washer processing, handling the fine ore and tailings in metal mines, handling

Tobee 10x8R-M Medium-Duty Slurry Pump is designed specifically for successive use in slurry-type applications where a large flow at a low to medium developed head is required. The M slurry pump, with its encapsulated design, is similar in design to the AH centrifugal slurry pump, but with a

Tobee 12/10F-M Slurry Pump is a proven horizontal end suction centrifugal slurry pump that will reliably and economically handle abrasive and corrosive medium duty services. The 12/10F-M medium slurry pumps are of heavy-duty construction, designed for continuous pumping of highly abrasive and

Tobee TZ Severe Duty Slurry Pumps are designed for large capacity, high head and multi-stages in series; they are especially used in ash and slag handling systems and slurry transportation in power plants, metallurgy, coal and other industries. As the latest generation of centrifugal slurry pump

Tobee TJ High Efficient Slurry Pump is a new generation of centrifugal slurry pumps based on modern hydromechanics and mechanics theories. TJ series slurry pumps are designed for heavy duty, high head applications like ash removal in power plants, coal, filter press feed and mining tailing, etc.

Tobee HH High Head Slurry Pump lines were designed to produce high heads per stage at high pressures, Commonly used for long distance transport lines, the HH slurry pumps can often satisfy application duties with a single pump where others require multiple pumps in series. Design Features: √

Tobee AH Series Slurry Pumps are the most comprehensive range of centrifugal slurry pumps for use in mining, minerals processing, coal preparation, dredging, metallurgy, power plant, chemical and general industry applications. The wetted parts materials are designed from high abrasion- and

Size: 1" to 22" capacity: 3.6-5400 m3/h head: 6-125 m handling solids: 0-130mm concentration: 0%-70% materials: hyper chrome alloy, rubber, polyurethane, ceramic, stainless steel etc.

Tobee TL(R) FGD Limestone Slurry Pump is the new-generation high-efficiency energy-saving pump product elaborately researched and developed by Tobee through absorbing the technical advantages from similar FGD pumps from domestic and abroad, with reference to the technical specifications of flue gas