Multi-rip saw WD300/350 KBA Walter

The WD 300/350 KBA Walter multi-saw machine is designed for sawing double-edged timber with high productivity into edged lumber. The workpiece is fed by a caterpillar conveyor. Stepless electronic feed speed adjustment allows you to select the optimal sawing mode. The claw guard provides effective protection against the back ejection of a board or slab. The thickness of the resulting workpiece depends on the spacers between the saws, while the saws on both shafts are in the same vertical plane, which makes it possible to use saws of smaller diameter and smaller thickness, the advantage of this solution is a smaller cut (reducing material consumption and reducing energy consumption ). Multi-saw machines of this type are used in large industrial enterprises, as well as in small workshops that process wood. The multi-saw machine can be manufactured with cutting heights: 150 mm, 170 mm and 220 mm. Maximum thickness of the prism, mm Maximum width of the prism, mm 600 Diameter of the upper shaft, mm Ø 70 Diameter of the lower shaft, mm Ø 70 Length of the working part of the upper shaft, mm Ø 550 Length of the working part of the lower shaft, mm Ø 550 Maximum quantity saw, upper shaft, pcs. 10-15 lower shaft, pcs. 10-15 Upper shaft drive motor power, kW Lower shaft drive motor power, kW Feed drive motor power, kW 4.0 Engine rotation speed (saw drive), rpm. 2900 Feed speed (smooth adjustment), m/min. 0÷25 Machine weight, kg 3000-4000