Equipment for the production of biodiesel plant CTS, 1 t/day (automatic), raw animal fat

High quality equipment from one of the best European manufacturers. Reliable, technologically advanced, at a reasonable price, significantly lower than that of competitors. Equipment CTS for the production of biodiesel, animal fat raw material 1 t/shift. Unlike companies producing equipment for the production of biodiesel, based on the old, "barrel" technologies used in the last century, our company uses the principle of magnetic pulse high-frequency cavitation, which was used in secret technologies, which allows us to achieve significant advantages: -pulse cavitation reactors successfully and stably operate both on crude and refined oils, as well as on all types of animal fats and their mixtures with vegetable oils. These are sunflower, rapeseed, linseed, palm, mustard, etc., with almost any acid number, as well as overcooked oil waste from restaurants and bakeries, beef, pork and chicken fats - waste from livestock and poultry processing factories. Passing the reaction "in one pass" In the magnetic pulse cavitation technology, it is not necessary to carry out a repeated interesterification reaction, as in the old "barrel" technologies. The time for obtaining finished biodiesel is reduced by 8-10 times. Cleaning with sorbents, washing and drying of biodiesel is not required. The minimum amount of alcohol and catalyst. No alcohol recovery. During cavitation treatment, oil heating is not required, and as a result, energy savings are 5-7 times. Low temperature reaction at room temperature. Magnetic pulse high-frequency cavitation treatment in the reactor occurs at the molecular level. All components are subjected to pulses of magnetically directed cavitation. The minimum overall dimensions of the modules are 5-10 times smaller than traditional complexes of similar performance. Biodiesel from animal fat. Plant BNR 250 (250-300 liters per hour) automatic, raw animal fat The automatic system BNR250 consists of: PPS-CT 1200: electronic system for pre-dosing and processing of raw products. ROTON-B 7 - magnetic impulse reactor for BNR 250. Automatic control system (electric cabinet, PLC, PC, software, etc.) Pipes, fittings, etc. Separation system: 6.1. Separation tank, sensors, pump, valves, etc. 7.2. Electronic monitoring system for bottling, separation and unloading of finished products Technical parameters: Productivity, liter per hour 250-300 Rated power, kW 11 Weight (approximately), kg 540 Degree of automation full Mode of operation continuous Processing capacity, kWh / liter (no more ) 0.028 Capacity adjustment yes Area occupied by one module, m2 2.7 Overall dimensions (L x W x H) 2250x1390x1610 mm For the production of BioST, we cooperate only with reliable and well-known global suppliers, such as Grundfos, Siemens, Schneider Electric, Moeller, Fanuc etc. All BioST mechanisms are ATEX certified, which ensures the safe operation of the unit with liquids such as methanol and catalyst. BioSTs are designed to operate continuously for 24 hours and require no special maintenance.