Equipment for the production of Biodiesel plant, 1 t/day (automatic), vegetable oil

High-quality equipment from one of the best European manufacturers. Reliable, technologically advanced, at a reasonable price, significantly lower than that of competitors. Equipment of the CTS company, 1 t/shift, for the production of biodiesel from any Vegetable oil - sunflower, rapeseed, cottonseed, coconut, etc. Unlike companies producing equipment for the production of biodiesel, based on old, “barrel” technologies used in the last century, our company uses the principle of magnetic-pulse high-frequency cavitation, used in secret technologies, which allows us to achieve significant advantages: Undemanding to the quality of the source oil High-frequency magnetic-pulse cavitation reactors operate successfully and stably on both crude and refined oil, as well as all types of animal fats and their mixtures with vegetable oils. These are sunflower, rapeseed, flaxseed, palm, mustard, etc., with almost any acid number, as well as waste of overcooked oil from restaurants and bakeries, beef, pork and chicken fats - waste from livestock and poultry processing factories. Completion of the reaction “in one pass” In magnetic pulse cavitation technology, it is not necessary to carry out a repeated transesterification reaction, as in the old “barrel” technologies. The time to obtain finished biodiesel is reduced by 8-10 times. No cleaning with sorbents, washing or drying of biodiesel is required. Minimal amount of alcohol and catalyst. No alcohol recovery. During cavitation treatment, oil heating is not required, and as a result, energy savings are 5-7 times. Low temperature reaction at room temperature. Magnetic pulse high-frequency cavitation treatment in the reactor occurs at the molecular level. All components are exposed to pulses of magnetically directed cavitation. The minimum overall dimensions of the modules are 5-10 times less space than traditional complexes of similar performance. Biodiesel from vegetable oil. Installation BNR 250 (250-300 liters per hour) automatic The automatic system BNR250 consists of: PPS-CT 1200: electronic system for pre-dosing and processing of initial products. ROTON-B 7 - magnetic pulse reactor for BNR 250. Automatic control system (electrical cabinet, PLC, PC, software, etc.) Pipes, fittings, etc. Separation system: 6.1. Separation tank, sensors, pump, valves, etc. 7.2. Electronic system for monitoring the filling, separation and unloading of finished products Technical parameters: Productivity, liter per hour 250-300 Rated power, kW 11 Weight (approximately), kg 540 Degree of automation full Operating mode continuous Processing capacity, kW hour / liter (no more ) 0.028 Capacity adjustment yes Area occupied by one module, m2 2.7 Overall dimensions (L x W x H), mm 2250x1390x1610 For the production of BioST, we cooperate only with reliable and well-known global suppliers, such as Grundfos, Siemens, Schneider Electric, Moeller, Fanuc, etc. All BioST mechanisms are ATEX certified, which ensures safe operation of the unit with liquids such as methanol and catalyst. BioSTs are designed to operate continuously for 24 hours and require no special maintenance.