CTS biodiesel plant, 10-20 t/day (Semi-automatic), vegetable oil raw material

High quality equipment from one of the best European manufacturers. Reliable, technologically advanced, at a reasonable price, significantly lower than that of competitors. CTS equipment, 10-20 tons/day, for the production of biodiesel from any vegetable oil - sunflower, rapeseed, cottonseed, coconut, etc. Unlike companies that produce equipment for the production of biodiesel based on old, "barrel" technologies used in the last century, our company uses the principle of magnetic pulse high-frequency cavitation, which was used in secret technologies, which allows us to achieve significant advantages: Undemanding to the quality of the original oil as well as all types of animal fats and their mixtures with vegetable oils. These are sunflower, rapeseed, linseed, palm, mustard, etc., with almost any acid number, as well as overcooked oil waste from restaurants and bakeries, beef, pork and chicken fats - waste from livestock and poultry processing factories. Passing the reaction "in one pass" In the magnetic pulse cavitation technology, it is not necessary to carry out a repeated transesterification reaction, as in the old "barrel" technologies. The time for obtaining finished biodiesel is reduced by 8-10 times. Cleaning with sorbents, washing and drying of biodiesel is not required. The minimum amount of alcohol and catalyst. No alcohol recovery. During cavitation treatment, oil heating is not required, and as a result, energy savings are 5-7 times. Low temperature reaction at room temperature. Magnetic pulse high-frequency cavitation treatment in the reactor occurs at the molecular level. All components are subjected to pulses of magnetically directed cavitation. The minimum overall dimensions of the modules are 5-10 times smaller than traditional complexes of similar performance. Plant BNR 1000S (1000 liters per hour) Semi-automatic The automatic system BNR 1000S consists of: PPS-CT 1200: electronic system for predosing and processing of raw products. ROTON-B 30 - magnetic impulse reactor for BNR 1000. magnetic impulse reactor Automatic control system (electric cabinet, PLC, PC, software, etc.) Pipes, fittings, etc. Separation system: 6.1. Separation tank, sensors, pump, valves, etc. 7.2. Electronic monitoring system for bottling, separation and unloading of finished products Technical parameters: Productivity, liter per hour 1000-1200 Rated power, kW 33 Weight (approximately), kg 985 Degree of automation Semi-automatic Operation mode continuous Processing capacity, kWh / liter (no more) 0.028 Capacity adjustment yes Area occupied by one module, m2 3.5 Overall dimensions (L x W x H), mm 2870x1390x2620 Moeller, Fanuc, etc. All BioST mechanisms are ATEX certified, which ensures the safe operation of the unit with liquids such as methanol and catalyst. BioSTs are designed to operate continuously for 24 hours and require no special maintenance.