Block machine for production of paving tiles Sumab R-1000 (1300 m2) Sweden

Representative of the Swedish company "Scandinavian&UK Machines АВ" /SUMAB/ – offers you to familiarize yourself with equipment for production of concrete and concrete products - mobile and stationary concrete plants, vibropresses for production of paving tiles and curbs, equipment for production of wall panels and blocks, equipment for unloading and storage of cement. Plants for production of cold asphalt.

The representative of SUMAB offers high-quality equipment at factory prices, without intermediaries.

The company provides a full range of services - delivery, commissioning works, maintenance service.

Stationary automatic block-line for production of paving tiles, blocks/pavers/curbs and other concrete products SUMAB R-1000 (Sweden) in automatic and semi-automatic modes of operation.

These block-lines are equipped with a high-tech vibration system Knauer or Synchrotronic.

Maximum output (per shift (8 h)):
- 17,200 pcs hollow blocks (20x20x40 cm)
- 1360-1680 m2 of pavers (10x20x6 cm) per shift.
- 2400-2800 pcs of curbs depending on curb dimensions and presence of an additional facing layer.

Maximum press useful area: 1300x900 mm.

Components of the production line:
The stationary high-capacity Sumab plant consists of the following components:
Stationary block machine Sumab with automatic or semi-automatic control.
Vibration system Knauer, Germany.

Mold.
A separate mold is required for each type of product (pavers, blocks, curbs, etc.).

Additional material hopper for application of paint and hard surface on concrete products.

Device for moving finished concrete blocks from the block machine with start/stop ramp speed regulation, consists of two chain conveyor systems.

Elevator – Automatic device for lifting and accumulating pallets with finished products (with 10 or 12 levels for blocks or 2x10 or 12 levels for pavers).

Loverator – Automatic device for descending pallets with dry finished products from rails to the transport conveyor (with 10 or 12 levels for blocks or 2x10 or 12 levels for pavers).

Conveyor belt for moving pallets with dry products into cubic position and then pallet rotation – cross movement.

Pneumatic crane with gripper for transferring finished products from pallets to transport euro-pallets.

Return device for empty pallets – cross movement of pallets with return to the storage-accumulator.
Slats – conveyor for moving finished products to packing and to the warehouse.

Automatic control system of the production line and PC, Siemens software. Cables, fuse system, emergency safety system.

Concrete plant with capacity up to 20-30 m3.
3x15 m3 inert material storage,
mixer P1125/750 liters,
skip, cement feeder, pneumatically opening gates, screw conveyor and silo.

Siemens automation and PC for production of main concrete.

Electrical equipment.
Nominal machine power 44 kW
Fuse 160 A
Control voltage of hydraulic valves 24 V

Additional options:
Cement feed screw, length 10 m.
Cement silo 60 tons (including level indicators, filter, ladder, guards, etc.)

Concrete plant 10-15 m3 for production of hard surface curbs and/or colored pavers.
2x7.5 m3 inert storages, mixer P560/375 liters, skip, Siemens automation and PC.

Configuration can be changed according to the client's wishes.

Warranty: 24 months on supplied equipment.