Biodiesel plant CTS, 2-5 tons/day (semi-automatic), raw material: animal fat

High quality equipment from one of the best European manufacturers. Reliable, technologically advanced, at a reasonable price, significantly lower than that of competitors. CTS Biodiesel Equipment, 2-5 Tons/Day, for Biodiesel Production, Raw Material Animal Fat. Unlike biodiesel production equipment companies based on the old "barrel" technologies used in the last century, our company uses the principle of magnetic pulse high-frequency cavitation used in secret technologies, which allows achieving significant advantages: Undemanding to the quality of the original oil. High-frequency magnetic-pulse cavitation reactors successfully and stably operate both on crude and refined oils, as well as all types of animal fats and their mixtures with vegetable oils. These include sunflower, rapeseed, linseed, palm, mustard, etc., with almost any acid number, as well as overcooked oil waste from restaurants and bakeries, beef, pork and chicken fats — waste from livestock and poultry processing factories. Passing the reaction "in one pass". In the magnetic pulse cavitation technology, it is not necessary to carry out a repeated interesterification reaction, as in the old "barrel" technologies. The time for obtaining finished biodiesel is reduced by 8–10 times. Cleaning with sorbents, washing and drying of biodiesel is not required. The minimum amount of alcohol and catalyst. No alcohol recovery. During cavitation treatment, oil heating is not required, and as a result, energy savings are 5–7 times. Low-temperature reaction at room temperature. Magnetic pulse high-frequency cavitation treatment in the reactor occurs at the molecular level. All components are subjected to pulses of magnetically directed cavitation. The minimum overall dimensions of the modules are 5–10 times smaller than traditional complexes of similar performance. Biodiesel from animal fat. Plant BNR 500 (500 liters per hour). Semi-automatic, raw animal fat. The semi-automatic system BNR 5000 consists of: PPS-CT 1200: electronic system for pre-dosing and processing of raw products. ROTON-B 15 - magnetic impulse reactor for BNR 500. magnetic impulse reactor. Automatic control system (electric cabinet, PLC, PC, software, etc.). Pipes, fittings, etc. Separation system: 6.1. Separation tank, sensors, pump, valves, etc. 7.2. Electronic monitoring system for bottling, separation and unloading of finished products. Technical parameters: Productivity, liter per hour: 500. Rated power: 18 kW. Weight (approximately): 785 kg. Degree of automation: Semi-automatic. Mode of operation: continuous. Processing capacity, kWh/liter (no more): 0.028. Capacity adjustment: yes. Area occupied by one module: 3.0 m2. Overall dimensions (L x W x H): 2870x1390x2620 mm. For the production of BioST, we cooperate only with reliable and well-known global suppliers, such as Grundfos, Siemens, Schneider Electric, Moeller, Fanuc, etc. All BioST mechanisms are ATEX certified, which ensures the safe operation of the unit with liquids such as methanol and catalyst. BioSTs are designed to operate continuously for 24 hours and require no special maintenance.