Biodiesel plant CTS, 1 t/day (Semi-automatic), raw material: animal fat

High-quality equipment from one of the best European manufacturers. Reliable, technologically advanced, at a reasonable price, significantly lower than that of competitors. CTS Biodiesel Equipment, 1 ton/day, Biodiesel Production, Raw Material Animal Fat Unlike biodiesel production equipment companies based on the old barrel technology used in the last century, our company uses the principle of magnetic-pulse high-frequency cavitation used in secret technologies that allow achieving significant advantages: Undemanding to the quality of the feedstock High-frequency magnetic-pulse cavitation reactors successfully and stably operate both on crude and refined oils, as well as all types of animal fats and their mixtures with vegetable oils. These are sunflower, rapeseed, linseed, palm, mustard, etc., with almost any acid number, as well as overcooked oil waste from restaurants and bakeries, beef, pork and chicken fats - waste from livestock and poultry processing factories. Passing the reaction "in one pass" In the magnetic-pulse cavitation technology, it is not necessary to carry out a repeated interesterification reaction, as in the old "barrel" technologies. The time for obtaining finished biodiesel is reduced by 8-10 times. Cleaning with sorbents, washing and drying of biodiesel is not required. The minimum amount of alcohol and catalyst. No alcohol recovery. During cavitation treatment, oil heating is not required, and as a result, energy savings are 5-7 times. Low-temperature reaction at room temperature. Magnetic-pulse high-frequency cavitation treatment in the reactor occurs at the molecular level. All components are subjected to pulses of magnetically directed cavitation. The minimum overall dimensions of the modules are 5-10 times smaller than traditional complexes of similar performance. For the production of Biodiesel from Animal Fat. Plant BNR 250S (250-300 liters per hour) Semi-automatic, raw animal fat The automatic system BNR 250S consists of: PPS-CT 1200: electronic system for pre-dosing and processing of raw products. ROTON-B 7 - magnetic impulse reactor for BNR 250. Automatic control system (electric cabinet, PLC, PC, software, etc.) Pipes, fittings, etc. Separation system: 6.1. Separation tank, sensors, pump, valves, etc. 7.2. Electronic monitoring system for bottling, separation and unloading of finished products Technical parameters: Productivity, liter per hour 250-300 Rated power, kW 10 Weight (approximately), kg 540 Degree of automation semi-automatic Mode of operation continuous Processing capacity, kWh / liter (no more ) 0.028 Capacity adjustment yes Area occupied by one module, m2 2.0 Overall dimensions (L x W x H) 2250x1390x1610 mm For the production of BioST, we cooperate only with reliable and well-known global suppliers, such as Grundfos, Siemens, Schneider Electric, Moeller, Fanuc etc. All BioST mechanisms are ATEX certified, which ensures the safe operation of the unit with liquids such as methanol and catalyst. BioSTs are designed to operate continuously for 24 hours and require no special maintenance.